62
Dedicated Searches
4. Press the MODE softkey to change the receive
mode (AM, FM, NFM) from the default for the
current frequency range (auto).
5. Press the FrL/O softkey to add a found
frequency to the lockout list.
6. Press the STOR softkey to create a new CONV
object using the found frequency.
Dedicated SRVC Search
Your scanner’s dedicated SRVC search modes
provide you with the ability to instantly access
each of the scanner’s service search ranges
without creating a new SRVC object.
To activate dedicated SRVC search mode:
1. Press SRCH repeatedly until the desired
service search is indicated on the display. The
following service searches are available:
• Railroad: Searches the Association of
American Railroads (AAR) VHF railroad
frequencies used in the US and Canada.
• Public Safety (PubSafety): Searches
commonly used public safety frequencies.
Freq. (MHz) Band
0 30.8 - 47.6 VHF Low Band
1 151-173 VHF High Band
2 453-468 UHF Band
3 764-797 700 MHz Band
4 851-869 800 MHz Band
To Next Page
Loading...
