29
Creating Scannable Objects
q
CONV Channel
Scan Lists: *01
Freq: 25.000000
Save Exit Dflt
Menu name
Active menu item
Next menu item
(Scroll down for more
menu items)
Indicates cursor
location in menu
Menu softkeys. Press F1,
F2, and F3 to access.
Object menu notes:
• The first line of the display shows either:
to indicate the cursor is at the top position
of the menu,
to indicate the cursor is
at the bottom, or
to indicate there are
menu items above and below the cursor.
• The center (third) line of the display contains
the blinking cursor indicating the active menu
item.
• To see the help text for the active menu item,
press FUNC, then press SEL on the 5-way
pushbutton pad. To exit help, press SEL again.
• The last line of the display shows the softkeys,
which will change with each menu. In this
menu, the Save softkey will save your new
object to the file system, the Exit softkey
aborts the creation of the new object, and the
Dflt softkey restores the parameter of the
active menu item
to its default setting.
• If you press the q key on the bottom of the
5-way pushbutton pad, you can scroll down
and see all of the parameters that can be
specified for the object.
To Next Page
Loading...
