120
Menu Reference
SRVC
Parameter
Options Description
L/Out On or Off Permanent lockout for the
SRVC object. Also accessed by
pressing FUNC L/OUT while
the scanner is stopped on the
SRVC object.
LED Mode Solid or
Flash
Controls whether the Alert
LED flashes or remains on solid
when the Alert LED is used.
LED Color 0-7 Sets LED color to 0-7 as de-
fined in the GLOB menu. By
default, 0=LED Off, 1=Red,
2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Latch LED On or Off Normally the Alert LED is ac-
tive only while the object is
receiving a transmission. When
Latch is on, the Alert LED will
remain lit after the transmission
is complete, unless overridden
by a subsequent object that is
also using the Alert LED.
Backlight On, Off or
Flash
Controls whether the backlight
should be on, off or flashing
while the object is active.
Alarm None,
Chirp,
Hi-Lo,
Alert,
Ring,
2-Chirp,
Fast
Hi-Lo,
DTMF#
Sets the Audible Alarm for
the SRVC object. When an
Audible Alarm is selected,
the selected alarm will play
anytime the scanner stops for
activity on the SRVC object
while scanning.
Fav Yes or No When On, the SRVC object
is a member of the Favorites
Scan List.
To Next Page
Loading...
