124
Menu Reference
STLK
Parameters
Options Description
Zeromatic On or Off When on, enhances the
scanner’s ability to lock on to
the actual center frequency of
a search hit instead of an adja-
cent frequency.
Special On or Off STLK works by quickly sweep-
ing the RF spectrum in 1 MHz
increments to find nearby
strong signals. If the 1 MHz
sweep indicates that activity
is present in the 1 MHz range,
STLK sweeps that range to find
the source.
Search Dir Up or
Down
Sets search direction used
when STLK object is active.
Hit Count Numeric
value
Increments each time a trans-
mission is received on the STLK
object. Global “Hit Counts”
must be set to ON. Press the
Dflt softkey to reset to 0.
To Next Page
Loading...
