15
Signal Stalker II – Quickly sweeps the scanner’s
frequency ranges for transmissions from nearby
sources.
P25 NAC Functionality – P25 Network Access
Code (NAC) is used to provide selective squelch
operation on conventional digital channels.
Your PRO-651 will detect the NAC that is being
used on a P25 conventional digital channel, and
allow you to program NAC codes to block
transmissions that do not have a matching NAC,
including analog traffic on the same frequency.
Alert LED – Programmable tri-color LED can be
configured to illuminate or flash when certain
objects are active. Eight user-defined colors and
brightness levels can be specified from thousands
of possible combinations.
Audible alarms – Programmable audible
alarms can be configured to sound when certain
Scannable Objects are active. Can be used in
conjunction with, or separately from, the Alert
LED described above.
High Speed PC Interface – Use a USB Scanner
programming cable for full duplex mode at 6
times the speed of previous scanner models for
PC transfer and 8 times the speed of previous
models for radio to radio cloning. High speed
scanner programming cables are available at your
local RadioShack store or RadioShack.com.
Real-time Signal Strength Indicator – Shows
relative strength of received signals.
IMPORTANT NOTICE: The PRO-651 Digital
Scanner will not receive encrypted radio
communications, or radio transmissions that
utilize ProVoice digital modulation.
Understanding your Scanner
To Next Page
Loading...
