7
FUNC (Function)
Activates alternative key functions.
KEY/LIGHT
Activate backlight.
FUNC + KEY/LIGHT locks keypad.
MAN (Manual)
Places scanner in Manual Mode for monitoring single
objects.
SCAN /
Enters Scan Mode for scanning enabled objects.
FUNC + SCAN activates Signal Stalker II.
TUNE
Direct tuning of any valid frequency.
FUNC + TUNE loads current or most recently scanned
frequency into Tune.
SRCH (Search)
Enters Search Mode for dedicated service and frequency
searches.
ATT (Attenuator)
Toggles Attenuator on and off.
FUNC + ATT toggles Global Attenuator mode.
PRI (Priority)
Toggles Priority setting for selected or active object.
FUNC + PRI toggles Priority Mode on/off.
FAV (Favorites)
Activates Favorites Scan Mode.
FUNC + FAV adds current object to the Favorite Scan List.
WX /
Activates Weather Scan.
FUNC + WX activates Skywarn mode.
PGM (Program)
Puts scanner in Program Mode for editing radio-wide
options, adding new objects, or editing existing objects.
FUNC + PGM accesses V-Scanner Mode.
L/OUT
Toggles temporary Lockout on active or selected object.
FUNC + L/OUT applies permanent lockout (can be
changed in GLOB menu).
ENT (Enter)
PSE (Pause)
Pauses scan or search.
Understanding your Scanner
To Next Page
Loading...
