10
PREPARATION
You can power your scanner from any of three sources:
• internal batteries (not supplied)
• standard AC power (using an optional AC adapter)
• vehicle battery power (using an optional DC
adapter)
USING INTERNAL BATTERIES
You can power your scanner using four alkaline, lithi-
um, or rechargeable (Ni-Cd, or Ni-MH) AA batteries
(not supplied). For the longest operation and best per-
formance, we recommend the selected batteries avail-
able from your local RadioShack store.
Using Non-Rechargeable Batteries
Follow these steps to install non-rechargeable batteries.
1. Turn
VOLUME/OFF
counterclockwise until it clicks
to make sure the power is turned off.
2. Slide up and hold the tab on the back of the scan-
ner, then pull up the battery compartment cover
from the top edge.
20-524.fm Page 10 Tuesday, August 31, 1999 3:55 PM
To Next Page
Loading...
