33
SPECIAL FEATURES
DELAY
Sometimes a user might pause before replying to a
transmission. To avoid missing a reply on a specific
channel, you can program a 2-second delay into any
channel or frequency. The scanner continues to moni-
tor the channel frequency for an additional 2 seconds
after the transmission stops before resuming scanning
or searching.
Depending on how the scanner is operating, follow one
of these steps to program a delay.
• If the scanner is
scanning and stops
on an active channel
where you want to
store a delay, quickly
press
DELAY
before it
continues scanning
again.
DLY
appears.
• If the desired channel is not selected, manually
select the channel, then press
DELAY
.
DLY
ap-
pears.
• If the scanner is searching, press
DELAY
while the
scanner is searching.
DLY
appears and the scan-
ner automatically adds a 2-second delay to every
frequency it stops on in that band.
To turn off the 2-second delay, press
DELAY
while the
scanner is monitoring a channel, scanning, or search-
ing.
DLY
disappears.
TURNING CHANNEL-STORAGE
BANKS ON AND OFF
You can turn each channel-storage bank on and off.
When you turn off a bank, the scanner does not scan
any of the 50 channels in that bank.
20-524.fm Page 33 Tuesday, August 31, 1999 3:55 PM
To Next Page
Loading...
