Radio Shack PRO-94 - Using AC Power

13
Important:
This scanner can use
nickel-cadmium rechargeable batter-
ies. At the end of a nickel-cadmium
battery's useful life, it must be recy-
cled or disposed of properly. Contact
your local, county, or state hazardous
waste management authorities for in-
formation on recycling or disposal programs in your
area or call 1-800-843-7422. Some options that might
be available are: municipal curbside collection, drop-off
boxes at retailers such as your local RadioShack store,
recycling collection centers, and mail-back programs
.
USING AC POWER
You can power the PRO-94 using an 9V, 300 mA AC
adapter and a size H Adaptaplug
®
(neither supplied).
Both are available at your local RadioShack store.
Cautions:
You must use a Class 2 power source
that supplies 9V DC and delivers at least
300 mA. Its center tip must be set to neg-
ative and its plug must fit the PRO-94's
POWER 9V
300MA
jack. Using an adapter that does not meet
these specifications could damage the PRO-94 or
the adapter.
• Always connect the AC adapter to the PRO-94 be-
fore you connect it to AC power. When you finish,
disconnect the adapter from AC power before you
disconnect it from the PRO-94.
1
-
8
0
0
-
8
4
3
-
7
4
2
2
!
20-524.fm Page 13 Tuesday, August 31, 1999 3:55 PM