37
TURNING THE KEYTONE OFF/ON
1. Turn off the scanner.
2. While holding down
L-OUT/S/S,
turn on the scan-
ner.
OFF
bEEP
appears.
To turn the key tone back on, repeat these steps.
on
bEEP
appears.
TURNING THE BATTERY SAVE
FUNCTION OFF/ON
When the scanner is set to receive (monitor) a manually
selected channel, and it is not actively scanning, using
the battery save feature conserves energy.
To turn the battery save function off or back on, turn off
the scanner, then hold down
PRIORITY
and turn on the
scanner.
•
OFF
SAVE
briefly appears when battery save has
been turned off.
•
on
SAVE
briefly appears when battery save has
been turned on, and
appears.
When the battery save feature is active, the scanner re-
peatedly turns off the internal power for 1 second, then
turns it back on for about
1
/
2
second to check for a
transmission.
S
20-524.fm Page 37 Tuesday, August 31, 1999 3:55 PM
To Next Page
Loading...
