18
CONNECTING AN EXTENSION
SPEAKER
In a noisy area, an optional extension speaker, posi-
tioned in the right place, might provide more comfort-
able listening. Plug the speaker cable’s
1
/
8
-inch (3.5-
mm) mini-plug into your scanner’s jack. Your local
RadioShack store carries a selection of suitable speak-
ers.
ATTACHING THE BELT CLIP
To make your scanner easier to carry when you are on
the go, use the supplied belt clip. Use a Phillips screw-
driver and the supplied screws to attach the clip to the
scanner.
20-524.fm Page 18 Tuesday, August 31, 1999 3:55 PM
To Next Page
Loading...
