31
LISTENING TO THE MONITOR
MEMORIES
To listen to the frequency stored in any one of the ten
monitor memories, press
MAN
,
MON/CLR (•)
, then the
number of the desired monitor memory (0
–
9), or re-
peatedly press
MON/CLR (•)
to step through the monitor
memories.
Note:
To listen to the monitor memories, the priority
channel feature must be turned off (see “Priority” on
Page 34).
MOVING A FREQUENCY FROM A
MONITOR MEMORY TO A
CHANNEL
1. Press
MAN
.
MAN
appears.
2. Enter the number of the desired target channel
where you want to move the frequency that is
stored in the monitor memory, then press
PROG
.
PGM
appears.
3. Press
MON/CLR (•)
then enter the number (1–10) of
the monitor memory containing the frequency.
4. Press
E
. The frequency transfers from the monitor
memory into the selected channel.
20-524.fm Page 31 Tuesday, August 31, 1999 3:55 PM
To Next Page
Loading...
