Radio Shack PRO-94 - Page 30

30
To skip a frequency, press
S/S
(L-OUT)
when the scanner
stops on the frequency during
a limit, direct, or service
search. The scanner stores the
frequency in memory and au-
tomatically resumes the
search.
To clear a single frequency from skip memory so the
scanner stops on it during a limit, direct, or service
bank search:
1. Press
HOLD
to stop the search.
2. Press
W
or
V
to select the frequency.
L/O
ap-
pears.
3. Press
S/S
.
L/O
disappears.
To clear all the skip frequencies at once while search-
ing, press
HOLD
, then hold down
S/S
until the scanner
beeps twice.
Notes:
• If you selected all frequencies to be skipped within
the search range, the scanner beeps 3 times and
does not search.
• If you select more than 20 frequencies to skip,
each new frequency replaces a frequency previ-
ously stored, beginning with the first stored fre-
quency.
• Press
W
or
V
to select a skipped frequency while
HOLD
appears.
L/O
appears when you select a
skipped frequency.
20-524.fm Page 30 Tuesday, August 31, 1999 3:55 PM