Radio Shack PRO-94 - Basic Operation and Scanning; Turning On and Setting Squelch

25
OPERATION
TURNING ON THE SCANNER
AND SETTING SQUELCH
Note:
Make sure the scanner’s antenna is connected
before you turn it on.
1. Turn
SQUELCH
fully counterclockwise.
2. Turn
VOLUME/OFF
clockwise until it clicks and you
hear a hissing sound.
3. If the PRO-94 is scanning, press
MAN
(manual) to
stop scanning, then turn
SQUELCH
clockwise until
the hissing stops.
VOLUME
SQUELCH
20-524.fm Page 25 Tuesday, August 31, 1999 3:55 PM