36
USING THE KEYLOCK
To protect the scanner from accidental program chang-
es, turn on the keylock feature. When the scanner is
locked, the only controls that operate are
SCAN
,
MAN
,
KEYLOCK
,
VOLUME/OFF
, and
SQUELCH
.
To turn on the keylock, hold down
KEYLOCK
until
K/L
appears. To turn it off, hold down
KEYLOCK
until
K/L
disappears.
Note:
Using keylock does not prevent the scanner from
scanning channels.
USING THE DISPLAY BACKLIGHT
To turn on the display light for easy viewing at night,
press .The display lights for 15 seconds. To turn
off the light sooner, press again.
CHANGING SEARCH SPEEDS
The PRO-94 has two search speeds.
To switch between the normal and Hypersearch speeds
during limit search or direct search, press
H/S
.
HYPER
appears during Hypersearch.
Note:
Hypersearch applies only to the 5 kHz step
bands (29–54 MHz, 137–174 MHz, and 216–224.9950
MHz).
Normal Search Hypersearch
100 steps/second 300 steps/second
20-524.fm Page 36 Tuesday, August 31, 1999 3:55 PM
To Next Page
Loading...
