23
DLY
— appears when you select a delay.
L/O
— appears when you manually select a channel
you locked out.
K/L
(keylock) — appears when you lock the keypad.
Error
— appears when you make an entry error.
MON
— appears during search modes, ID search mon-
itor, program ID monitor, or when you select a monitor
memory. The number to the right of this indicator shows
the current monitor memory.
MAN
— appears when you press
MAN to directly enter a
channel number or frequency
.
PGM
— appears while you store a frequency into a
channel, while you enter a frequency range during a
limit search, or when you program trunking frequencies,
fleet maps, or ID memories while trunking.
HYPER
— appears while Hyperscan or Hypersearch is
active during a direct or limit search.
W
or
V
— appears during a limit, direct, or service
searches, indicating the search direction.
— appears when the battery save function is active
(during conventional scanning only).
WX
HAM
MRN
AIR
POL
— appears along with an indi-
cator which shows the current service bank during a
service search.
ALERT
— appears when the weather alert is turned on,
or flashes when the scanner detects an alert coded sig-
nal.
M
or
ME
— indicate either a Motorola (M) trunking sys-
tem or EDACS (ME) system.
CH
— appears with a number to its left to indicate to
which channel the scanner is tuned to.
S
20-524.fm Page 23 Tuesday, August 31, 1999 3:55 PM
To Next Page
Loading...
