Radio Shack PRO-94 - Page 71

71
Scanner is set to
receive Type I
trunked frequen-
cies, but does
not scan them.
The fleet map
you have select-
ed or entered
might be incor-
rect.
Check the fleet
map and correct it
if necessary (see
“Scanning Type I
and Hybrid
Trunked Sys-
tems” on Page 55
and “Program-
ming a Fleet Map”
on Page 60).
Scanner does
not acquire a
data channel.
SQUELCH
is not
correctly adjusted
for trunk scan-
ning.
Adjust squelch for
trunk scanning.
See “Setting
Squelch for the
Trunking Mode”
on Page 43.
The frequency
used for the data
channel is miss-
ing.
Press
SRC
to
search for the
data channel (see
“Storing Trunked
Frequencies” on
Page 43).
Missing replies to
conversations.
The system you
are trying to track
is a Type I sys-
tem, and the
scanner is set to
scan Type II sys-
tems.
Set the scanner to
receive Type I
trunked frequen-
cies. See “Scan-
ning Type I and
Hybrid Trunked
Systems” on
Page 55.
The selected
fleet map is incor-
rect.
Try another preset
fleet map or pro-
gram your own
fleet map (see
“Scanning Type I
and Hybrid
Trunked Sys-
tems” on
Page 55).
Not all of the
trunk’s frequen-
cies have been
entered.
Enter all of the
trunk’s frequen-
cies (see “Storing
Trunked Frequen-
cies” on Page 43).
Problem Possible Cause Remedy
20-524.fm Page 71 Tuesday, August 31, 1999 3:55 PM