quickly change parameter values. After saving made changes, the updated file
is sent from the computer level to balance’s software. On completing of
uploading process and saving changes the balance accepts new parameter
settings. The procedure requires that a user is familiar with balance
parameters and has good knowledge of computers.
12 ID setting
Enables entering codes to moisture analyzer memory
13 Automatic ID Printout
Determines whether a code entered to moisture analyzer’s memory should be
automatically sent via RS 232 interface.
14. Previous version
The parameter enables functioning of a moisture analyzer as it would be if
previous software version was running, i.e. after setting the parameter value to
<YES> the moisture analyzer operates the drying process and the drying
temperature range similarly to the one specific for the previous software
version (in comparable temperature conditions).
The parameter enables using the drying process settings specific for the
previous version of this type of moisture analyzers if such are in use of an
organization. The parameter of a new moisture analyzer allows an operator to
use already determined and verified drying procedures for materials to be
tested, as implemented in older devices of the same type.
To Next Page
Loading...
