17
17
Special Features
ESP-Me Advanced User Manual
4. In AUTO mode; when a delay between valve
starts is in progress, the screen will alternate
between showing “DELAY” and showing the
amount of time remaining until the delay
period between valve starts is complete.
5. When an Inter-Station Delay is in progress, press the
Advance Station button to cancel and start watering
for the station.
Set Master Valve By Station
Control the water supply to selected stations through
the use of a master valve.
SPECIAL FEATURE AVAILABLE
In some systems, a master valve (or pump start relay)
must be opened or activated to supply water to a valve.
Set Master Valve Control to MV ON to allow a valve to be
controlled by a master valve.
NOTE: The ESP-Me does not support a Normally
Open Master Valve.
1. Turn the dial to Set Station
Run Times.
2. Press and HOLD both
and at the same time.
3. Press or to select the desired Station.
1 MVON
STATION
4. Press or to set MV ON or MV OFF.
2 MVOFF
STATION
NOTE: MV remains opened for assigned stations
during Station Delay. For more details, see Station
Delay in the previous section.
NOTE: MV status is defaulted to OFF for all stations.
To Next Page
Loading...
Need help?
General
