14
14
Advanced Options
ESP-Me Advanced User Manual
Manual Program
Start watering immediately for any program.
Automatic irrigation events for the same program will not
run when manual program run is in progress.
NOTE: All manual watering operations include the
Seasonal Adjust value.
1. Turn the dial to
Manual Program.
2. Press the Program Select
button to select the desired
program; the total run time
for the program is displayed.
3. Press and HOLD the Hold to Manually Start button to
begin watering.
REPEAT as desired to queue additional programs to
run manually.
NOTE: A maximum of 38 stations can be queued
across all four programs.
4. Irrigation will begin and “STARTED” will appear on the
display.
STARTED
STATIONMANUAL
NOTE: You can also run a manual program with
the dial position set to Auto Run by pressing the
Program Select button to select a program and
then pressing the Hold to Manually Start button.
Refer to Auto Run in the Normal Operation section
for details.
During Manual Watering:
In AUTO RUN mode, the display shows a blinking sprinkler
symbol, the active Station number and the remaining Run
Time.
5. Press the Advance Station button to advance to the
next station if desired.
6. To cancel manual watering, turn the
controller dial to OFF for three seconds
and then back to AUTO RUN.
To Next Page
Loading...
Need help?
General
