7
7
Basic Operation
ESP-Me Advanced User Manual
Set Watering Start Times
Set the time of day that a program
begins to water.
Up to six Start Times (1–6) are available for each program.
1. Turn the dial to
Set Watering Start Times.
2. Press or to set the
1st Start Time (ensuring
that the AM/PM setting is
correct), then press .
PGM
A
START TIME
1200
AM
1st
REPEAT as desired to set an additional Start Times
(2nd, 3rd, etc.) for the selected program.
Each station in the selected program will run in sequence
from 1 up to 22. Each program will run in sequence from A
through D.
If you have the same start time included in more than 1
program, they will stack one upon the other. For example,
if program A runs for 40 minutes and Program B is
scheduled to run for 20 minutes, Program B will not start
until program A has nished.
NOTE: Program A has a preset default start time
of 8:00 AM. NO default start times are set for other
programs.
Set Station Run Times
Set the duration of time that a station waters.
SPECIAL FEATURE AVAILABLE
Run Times can be set from one minute up to six hours.
After 60 minutes the increments of adjustment will
increase to 10 minute increments.
1. Turn the dial to
Set Station Run Times.
2. Press or to set the
desired Run Time for the
selected Station,
then press .
1 010
PGM
A
MINUTESHOUR
RUN TIME
STATION
REPEAT to set the Run Time for each remaining
Station in the selected program.
NOTE: Program A has default Run Times of 10
minutes for stations 1 through 4.
To Next Page
Loading...
Need help?
General
