8
8
Select Days To Water
ESP-Me Advanced User Manual
Select Days to Water
Introduction and Overview
A program can be scheduled to run on certain days of the
week, specic dates on the calendar, or at regular intervals
such as every third day.
There are four different watering options:
By Day (Custom/Default)
This is the default program option and also the most
common. Set watering to occur on specic days of the
week by choosing ON or OFF for that day of the week.
1, 3, 5...29
Odd Days
Set watering to occur on all ODD calendar days, for
example 1, 3, 5...29
2, 4, 6...30
Even Days
Set watering to occur on all even calendar days, for
example 2, 4, 6...30
Cyclic Days
Set watering to occur at specic intervals, for example,
every 2 days, or every 3 days, etc.
Watering Options
Select the calendar days or intervals that a program is
allowed to water.
By Day (Custom)
This is the default setting for the controller. Set watering
to occur on specic days of the week by choosing ON or
OFF for that day of the week.
To schedule By Day:
1. Turn the dial to Advanced
Watering Cycles.
2. Press the Program Select button to
select the desired program.
3. Press or to select BY DAY.
PROGRAM
SELECT
A B C D
BY DAY
PGM
A
TU WE TH FR SA SUMO
4. Turn the dial to MON.
5. Press or to set the
selected day as either
OFF or ON (default)
for watering, then turn the
dial to the next day of the
week.
mon on
PGM
A
TU WE TH FR SA SUMO
REPEAT to select additional days as desired for the
selected program.
NOTE: In the example illustration, Thursday is shown
as o and all other days are on.
5.
To Next Page
Loading...
Need help?
General
