A.4.6 E1 Alarm Mask information:----------------------------------------------------------------------------------------------------------- 54
A.4.7 Sub-card information (RAM) ---------------------------------------------------------------------------------------------------------- 55
A.4.8 Sub-card information (EEPROM)---------------------------------------------------------------------------------------------------- 59
A.5 Cross Set Query menu: ---------------------------------------------------------------------------------------------------59
A.5.1 Four E1 Cross Query (RAM)---------------------------------------------------------------------------------------------------------- 60
A.5.2 Four User Cross Query (RAM) ------------------------------------------------------------------------------------------------------- 60
A.5.3 Four E1 Cross Query (EEPROM) --------------------------------------------------------------------------------------------------- 61
A.5.4 Four User Cross Query (EEPROM)------------------------------------------------------------------------------------------------- 62
A.6 State Info Query -------------------------------------------------------------------------------------------------------------62
A.6.1 Receive State Query -------------------------------------------------------------------------------------------------------------------- 62
A.6.2 Transmit State Query ------------------------------------------------------------------------------------------------------------------- 63
A.7 Alarm Query menu----------------------------------------------------------------------------------------------------------63
A.7.1 Device Alarm------------------------------------------------------------------------------------------------------------------------------ 63
A.7.2 System Alarm ----------------------------------------------------------------------------------------------------------------------------- 64
A.8 Setting menu -----------------------------------------------------------------------------------------------------------------64
A.9 System Setting menu ------------------------------------------------------------------------------------------------------64
A.9.1 ID set---------------------------------------------------------------------------------------------------------------------------------------- 65
A.9.2 Baud Rate Set ---------------------------------------------------------------------------------------------------------------------------- 65
A.9.3 Line-Board set ---------------------------------------------------------------------------------------------------------------------------- 65
A.9.4 E1 set --------------------------------------------------------------------------------------------------------------------------------------- 66
A.9.5 E1 Clock Set ------------------------------------------------------------------------------------------------------------------------------ 67
A.9.6 Net channel Set -------------------------------------------------------------------------------------------------------------------------- 67
A.9.7 Alarm Sound Set ------------------------------------------------------------------------------------------------------------------------- 69
A.9.8 User Board Set --------------------------------------------------------------------------------------------------------------------------- 70
A.9.9 DCD and CTS of V35V24 Board with Alarm Set--------------------------------------------------------------------------------- 72
A.10 Line Board Setting menu ------------------------------------------------------------------------------------------------72
A.10.1 Alarm Mask Set------------------------------------------------------------------------------------------------------------------------- 72
A.10.2 Loopback Set --------------------------------------------------------------------------------------------------------------------------- 73
A.10.3 ALS Set ----------------------------------------------------------------------------------------------------------------------------------- 73
A.10.4 Ether Net Port Set --------------------------------------------------------------------------------------------------------------------- 73
A.10.5 Ether Net Port Work Set-------------------------------------------------------------------------------------------------------------- 73
A.10.6 Transmit Band Width Set------------------------------------------------------------------------------------------------------------- 74
A.10.7 Receive Band Width Set ------------------------------------------------------------------------------------------------------------- 74
A.10.8 Reset Ether Net ------------------------------------------------------------------------------------------------------------------------ 74
A.11 2E1 Setting menu ---------------------------------------------------------------------------------------------------------74
A.11.1 Alarm Mask Set ------------------------------------------------------------------------------------------------------------------------- 75
A.11.2 Loopback Set---------------------------------------------------------------------------------------------------------------------------- 75
A.11.3 ALS Enable Set ------------------------------------------------------------------------------------------------------------------------- 75
A.12 E1 Set ------------------------------------------------------------------------------------------------------------------------76
A.12.1 Use Set ----------------------------------------------------------------------------------------------------------------------------------- 76
A.12.2 Mode Set --------------------------------------------------------------------------------------------------------------------------------- 76
A.12.3 Mask Set --------------------------------------------------------------------------------------------------------------------------------- 76
A.12.4 CRC Set ---------------------------------------------------------------------------------------------------------------------------------- 77
A.13 User Card Set (with signal) menu-------------------------------------------------------------------------------------77
A.13.1 Input Signal ------------------------------------------------------------------------------------------------------------------------------ 77
A.13.2 Output Signal---------------------------------------------------------------------------------------------------------------------------- 77
A.13.3 Signal Bit --------------------------------------------------------------------------------------------------------------------------------- 77
A.13.4 10-line mode ---------------------------------------------------------------------------------------------------------------------------- 78
A.14 V35 User Card Setting menu-------------------------------------------------------------------------------------------78
A.14.1 Sub-card Slot Number ---------------------------------------------------------------------------------------------------------------- 78
A.14.2 Receive Data Phase------------------------------------------------------------------------------------------------------------------- 79
A.14.3 Transmit Data Phase------------------------------------------------------------------------------------------------------------------ 79
A.14.4 Channel Select ------------------------------------------------------------------------------------------------------------------------- 79
A.14.5 Loopback Set --------------------------------------------------------------------------------------------------------------------------- 79
A.14.6 Error Code Test------------------------------------------------------------------------------------------------------------------------- 80
A.14.7 Auto to Adjust Phase for Transmit ------------------------------------------------------------------------------------------------- 80
A.14.8 To Adjust Receive Phase------------------------------------------------------------------------------------------------------------- 80
A.15 V24 User Card Set--------------------------------------------------------------------------------------------------------80
A.16 10BaseT Ethernet sub-card setting menu --------------------------------------------------------------------------81
A.16.1 Sub-Board Slot Number -------------------------------------------------------------------------------------------------------------- 81
A.16.2 Channel Select ------------------------------------------------------------------------------------------------------------------------- 81
A.16.3 Buffer Size Set-------------------------------------------------------------------------------------------------------------------------- 81
A.16.4 Default Port Mode---------------------------------------------------------------------------------------------------------------------- 81
A.16.5 Reset Ethernet Port ------------------------------------------------------------------------------------------------------------------- 82
A.17 RS232, RS422 and RS485 sub-card setting menu --------------------------------------------------------------82
A.17.1 Channel Band Width Set ------------------------------------------------------------------------------------------------------------- 82
A.18 10/100BaseT auto-negotiation Ethernet sub-card Setting menu ---------------------------------------------82
A.18.1 Sub-Board Slot Number -------------------------------------------------------------------------------------------------------------- 82
To Next Page
Loading...
