Raisecom RC3000 - E1 Alarm Mask Information

www.raisecom.com User Manual
54
CRC Transmit: Enable
Alarm Sound Output: Enable
Work mode of VER A: Enable
10-line mode setting; enable
Device Query Command:1-8, Menu Display: M, Return: Q Command:
Note: Time Slot 1 is not available in network management channels.
Clock modes: Master clock
Slave clock (1 E1)
Slave clock (2 E1)
Slave clock (3 E1)
Slave clock (4 E1)
There are two ways to adapt clock: Auto
Manual
Net topology: Single E1 Direction
Double E1 Direction
Three E1 Direction
Four E1 Direction
Net Using Time Slot: Time Slot 0
Time Slot 1
CRC transmit: enable
disable
Version A work mode: enable
disable
10-line mode setting: enable
disable
Note: there is no timeslot 1 network management channel in fact because of device design.
A.4.6 E1 Alarm Mask information:
In device set query menu press number key 6, and there will be E1 Alarm Mask information:
Alarm LOS AIS LOF RAL LOMF LOMFC CRC
Real information:
1st E1 1=Mask 0 0 0 0 0 0 0
2nd E1 1=Mask 0 0 0 0 0 0 0
3rd E1 1=Mask 0 0 0 0 0 0 0
4th E1 1=Mask 0 0 0 0 0 0 0