Remote Control Commands
R&S
®
NRPxxS(N)
134User Manual 1177.5079.02 ─ 10
While a firmware update is in progress, the LED of the sensor flashes in bright white
color. When the firmware update is completed, you can read the result.
The result of the query is a readable string.
Example:
SYST:FWUP:STAT?
Query
"Success"
Response
Usage: Query only
Manual operation: See "Firmware Update" on page 56
SYSTem:HELP:HEADers? [<Item>]
Returns a list of all SCPI commands supported by the sensor.
Query parameters:
<Item> <block_data>
Usage: Query only
SYSTem:HELP:SYNTax? [<Item>]
Queries the relevant parameter information for the specified SCPI command.
Query parameters:
<Item>
Example:
SYST:HELP:SYNT? 'sens:aver:coun'
Usage: Query only
SYSTem:HELP:SYNTax:ALL?
Queries the implemented SCPI commands and their parameters. Returns the result as
a block data.
Usage:
Query only
SYSTem:INFO? [<item>]
Queries information about the system.
If queried without parameters, the command returns all available information in the
form of a list of strings separated by commas.
If you want to query specific information, add a query parameter.
Query parameters:
<item> "<string>" with the following values:
Manufacturer
Type
Configuring the System
To Next Page
Loading...
Need help?
General
