Operating instructions D30+ │ P30+ │ SheraPrint 30
Rapid Shape GmbH │ DOCR000231
CA UTION !
Risk of injury due to sharp objects!
The blade of the integrated peel-off device has a sharp
edge that can cause slight hand injuries through direct
contact.
— The blade must never be touched directly on the
cutting edge.
CA UTION !
Risk of injury from UV radiation!
The printing process, as well as the calibration of the
exposure unit, take place under the influence of UV
radiation. UV radiation can cause eye and skin damage
in the case of very long and direct exposure, as well as
without the wearing of prescribed protective equipment.
— The machine may only be operated with the
protective hood closed.
— During the printing process and manual process of
the building platform, as well as any other work
with and on the 3D printing system, the UV
protective goggles supplied must be worn.
— It is recommended to wear UV protective goggles
whenever working on the machine.
WA RNIN G!
Risk of injury due to harmful substances!
The chemical substances required for production and
post-processing can release harmful vapours and cause
dizziness and irritation of the respiratory tract. Direct skin
contact may cause skin
irritation.
— It is necessary to provide sufficient fresh air.
— Wear appropriate protective clothing and carry
out the work with ventilation if necessary.
— Follow the dosing instructions of the respective
manufacturer.
— Read the appropriate safety data sheets carefully.
To Next Page
Loading...
Need help?
General
