Operating instructions D30+ │ P30+ │ SheraPrint 30
Rapid Shape GmbH │ DOCR000231
The operator
— is obligated to read these operating instructions fully before
using the system for the first time.
— is obligated to ensure that all persons working with the machine
have read and fully understood the contents of these operating
instructions.
— is obligated to provide these operating instructions for the
personnel at a fixed location near the machine.
— is obligated to inform regularly all persons who work with the
machine about the current general accident protection
guidelines. must ensure that precautionary safety measures at
work are respected.
— is obligated to inspect regularly and keep up-to-date first aid
facilities and fire protection.
— is obligated to provide the prescribed safety equipment to all
persons working with the machine.
— is obligated to check all safety devices and safety equipment
regularly for their functionality.
Due to their professional training, knowledge and experience as well as
knowledge of the relevant standards and regulations, electricians are
able to carry out work on electrical systems and to recognise and avoid
possible dangers independently. The qualified electrician has been
specially trained in the working environment in which he or she is
active.
Basic requirements
of the personnel
Only persons who can be expected to perform their work reliably are
eligible as qualified personnel. People whose response capacity has
been affected, e.g. through drugs, alcohol or medication, may not
work on the machine.
Personnel who are being trained, instructed, taught or undergoing
general apprenticeships should only be allowed to work on the
machine under the constant supervision of the operator.
1.7 Personal protective equipment
Description of the
personal protective equipment
Personal protective equipment helps protect people from negative
impacts on their safety and health.
Personnel must wear personal protective equipment while working on
and with the machine, as referred to in the individual sections of this
manual.
The personal protective equipment must be provided by the operator
and must be checked for function before starting work on the machine.
The following describes the personal protective equipment:
Wearing UV goggles protects the eyes from harmful UV
radiation.
Wearing protective gloves protects
the skin from contact with skin damaging materials.
To Next Page
Loading...
Need help?
General
