Rapid Shape D30+ - 9 Decommissioning; Switching off the Machine; Shut down the Machine for a Long Time (> 1 Month)

Operating instructions D30+ │ P30+ │ SheraPrint 30
Rapid Shape GmbH │ DOCR000231
34 │ 44
9.1 Switching off the machine
To switch off the machine, please proceed as follows:
1. Go to the Home screen.
2. Press the 'Shut Down' button. The shutdown countdown will
appear. The machine counts for 10 seconds until the switch off
happens automatically.
3. Press the 'Shutdown' button in the lower right display to switch it
off sooner. If you want to stop switching off the machine, press
the 'Cancel' button.
4. Wait for the machine to shut down completely.
5. Switch off the machine using the main switch.
9.2 Shut down the machine for a long time (> 1 month)
For the long-term shutdown of the machine, please proceed as follows:
1. Switch off the machine. → Chapter 9.1
2. Disconnect the power supply.
3. Store the machine in a dry, dust-free and frost protected room.
→ Chapter 3.5