Rapid Shape D30+ User Manual

Operating instructions D30+ │ P30+ │ SheraPrint 30
31 │ 44
Rapid Shape GmbH │ DOCR000231
2. Turn the rotary knob of the platform to loosen it.
Do not completely loosen!
3. Place the platform on the guide rail of the platform mounting.
When doing so, make sure that the pins of the mounting fit
perfectly in the mounting of the platform.
4. Fix the platform with the rotary knob.
5. Close the machine. → Chapter 8.3
8.5 Print job
Print job (single)
To print your print job please proceed as follows:
1. Prerequisite: The machine was equipped with a building
platform and a material reservoir. → Chapter 8.4
2. Main menu: Press the 'Select Job' button. The job selection
opens.
3. Choose your print job.
4. Press the 'Start' button. The print job starts. The progress
summary is displayed.
Print multiple jobs
(Job-Queue)
Alternatively, you can print multiple print jobs in series.
To prepare the print job, please proceed as follows:
1. Go to the menu 'Start Job-Queue'
2. Select all jobs to be printed. → Figure 9
3. The list shows you which jobs can be printed fully automatically
and for which an operator action is required. (Emptying the
collecting basket or changing the reservoir).
In this menu you can also confirm the emptying of the collecting
basket. During operation, you can switch to the Job-Queue at
any time and add new jobs to the list.
When starting a print job, supporting messages may
appear, such as compatibility information for the job
regarding the selected material.
Figure 9: ‚Job-Queue’

Rapid Shape D30+ Specifications

General

Brand	Rapid Shape
Model	D30+
Category	3D Printers
Language	English