Rational CombiMaster Plus Original Installation Manual

5 | Placement
38 / 108 80.06.070_iCombiPro-iCombiClassic_IM_en-GB
2. Insert the stand into the foot locks.
Mobile stand
Align mobile stand
To counter any bumps in the ground and to align the mobile stand, proceed as
follows:
1. Loosen the headless screws on the castors with an Allen key.
2. Adjust the height to the castors with a screw wrench until the castors are
secure.
3. Secure the grub screw to the castors with a hexagon socket wrench.
Attach the mobile base frame
NOTICE
Damage to electrical or gas lines due to shifting
Also secure the unit with a suitable retention unit to prevent it from
slipping on the rear wall (retention units are not included in the scope of
delivery).
5.2.4 Installation on non-original substructures of the unit manufacturer
CAUTION
Risk of crushing due to the weight of the unit
Hands, fingers and feet can be crushed.
n
Use appropriate protective clothing during transport.
CAUTION
Risk of injury due to inadequate substructure
Setting up the unit on statically inadequate substructures can result in injury
and damage to the unit and substructure.

Rational CombiMaster Plus Specifications

General

Model	CombiMaster Plus
Manufacturer	Rational
Category	Oven
Cooking modes	Steam, Convection, Combination
Temperature range	30°C to 300°C
Cleaning system	Manual cleaning
Power Consumption	Varies by model
Steam Generator Output	Varies by model
Weight	Varies by model
Dimensions	Varies by model
Control type	Manual
Capacity	10-20 levels (depending on model)