1 | Introduction
6 / 108 80.06.070_iCombiPro-iCombiClassic_IM_en-GB
1 Introduction
1.1 Information on this manual
This document is the current version of the installation instruction at the time
of publication. Please note the relevant version and date.
This document is part of the unit. Read the manual prior to installation. The
manual is there to ensure that you use the unit safely and install it properly.
The illustrations in this manual are examples only and may differ from the unit.
This manual applies to the following units:
n
LM1: iCombi Pro
n
LM2: iCombi Classic
n
LM2: CombiMaster Plus XS
Storage
Keep the installation manual and operating instructions close to the unit. The
installation manual must be accessible for professionals authorised by the
manufacturer at any time during service calls.
Distribution
This installation manual must be passed on to the owner of the unit.
Circuit diagram
The starter kit contains a circuit diagram for the unit. If the circuit diagram is
lost, it can be found in the service parts catalogue and in the TechAssistant app.
The TechAssistant app is available from the App Store and Google Play.
Explanation of symbols
a A condition states all of the requirements that need to be met before the
unit can be used.
1. One action step describes an action to be performed by the reader.
> It expresses a successful interim result.
2. Another action step.
>> The result reflects the outcome of the action.
1.2 Target group
n
This document is intended for skilled technicians, who have been certified
by the manufacturer after attending training and safety instructions.
n
Installation, inspection, maintenance, and repair work must only be carried
out by trained technicians.
n
It is recommended that only technicians authorised by the manufacturer
perform inspection, maintenance and repair work.
n
The unit may not be used, cleaned, or maintained by children. The unit may
not be used for play. This is prohibited even under supervision.
To Next Page
Loading...
Need help?
General
