5 | Placement
80.06.070_iCombiPro-iCombiClassic_IM_en-GB 45 / 108
2. Check that the mobile oven rack can be pushed straight into the unit. If this
is not the case, use an trolley leveling device or transfer aid.
Trolley leveling device and rolling aid
n
If the floor is uneven, use an trolley leveling device to compensate the un-
evenness.
n
If there is a gully grid in front of the standalone unit, position a rolling aid
near the entry area of the mobile oven rack.
Handle storage
The included holder provides a secure place to store the mobile oven rack
handle during cooking.
1. Attach the holder for the handle to the cover of the unit, so that the holder is
aligned with the left side panel.
2. Hang the handle in the holder.
To Next Page
Loading...
