Rational SelfCookingCenter series - Page 195

Fault messages
195 / 203
fault indication when and how remedial action
Service 35 When it has been
switched on for 30
seconds,
Please connect UltraVent
®
to the power
supply.
Service 36 Displayed for 30
seconds after
switch-on and when
operating mode is
changed.
Cooking only possible with some restrictions
– Notify Customer Service.
Service 37 Displayed for 30
seconds after
switch-on and when
operating mode is
changed.
Cooking only possible with some restrictions
– Notify Customer Service.
Service 40 Displayed for 30
seconds during
CleanJet
®
+care
cleaning.
Restart CleanJet
®
+care cleaning. If the
error occurs again, please contact Customer
Service.
Service 41 Displayed for 30
seconds during
CleanJet
®
+care
cleaning.
Restart CleanJet
®
+care cleaning. If the
error occurs again, please contact Customer
Service.
Service 42 Displayed for 30
seconds during
CleanJet
®
+care
cleaning.
Restart CleanJet
®
+care cleaning. If the
error occurs again, please contact Customer
Service.
Service 43 Displayed for 30
seconds during
CleanJet ®+care
cleaning.
Restart CleanJet
®
+care cleaning. If the
error occurs again, please contact Customer
Service.
Service 44 Displayed for 30
seconds during
CleanJet
®
+care
cleaning.
Restart CleanJet
®
+care cleaning. If the
error occurs again, please contact Customer
Service.
Service 110 Displayed
continuously.
Please notify Customer Service.