Rauch AXIS-M 20.2 EMC - A.1.3 Connecting the Electronic Slide Actuators: Version Q;W;EMC

Commissioning
127
A
AXIS
AXIS 20.1
AXIS 30.2, AXIS 40.2
Attachment
1. Depressurise the hydraulic system.
2. Remove the hoses from the brackets attached to the frame of the machine.
3. Insert the hoses into the corresponding couplings on the tractor.
A.1.3 Connecting the electronic slide actuators: Version Q/W/EMC
A.1.4 Connecting the electronic slide actuators: Version C
NOTICE
Version R
Before extended road travel or during filling, close the two ball cocks on the
two-way unit. This prevents the automatic opening of the metering slide caused
by valve leakages in the tractor hydraulics.
NOTICE
The machines of the versions Q, W and EMC are equipped with an electronic
slide actuator.
The electronic slide actuator is described in a separate operator’s manual for the
operating unit. This operator’s manual is an integral part of the operating unit.
NOTICE
The machines of the version C are equipped with electronic slide actuators.
The electronic slide actuator is described in a separate operator’s manual for the
E-Click operating unit. This operator’s manual is an integral part of the operating
unit.
K
D
R
C
Q
W
EMC