Rauch AXIS-M 20.2 EMC - Spreading with Section Control (Varispread)

General commissioning (all machine types) 8
74
AXISAXIS
8.8 Spreading with section control (VariSpread)
With the spreading width assistant VariSpread, you can reduce the spreading
width and the application rate in parallel, up to four times per side. You can
spread on wedge-shaped fields with high precision.
Figure 8.21: Spreading with section control (VariSpread)
[1] Field border
[2] Sections 1 to 4: successive section width reduction on the right
[3] Tractor track
NOTICE
The VariSpread compatible machine is equipped with two electrical drop point
actuators. Via the QUANTRON-E2 operating unit or with the ISOBUS machine
control unit, you can specify the settings of the sections and achieve accurate
spreading results in wedge-shaped fields.
 More detailed information about possible settings of the sections is provided
in the operator’s manual of your machine control unit (QUANTRON, ISOBUS).
1
2
2
3
3
4
4
1
2
3