General commissioning (all machine types) 8
88
8.12 Parking and unhitching the machine
The machine can be securely parked on the frame or the stabilising rollers (op-
tional equipment).
Requirements for parking the machine:
Only park the machine on even and firm ground.
Only park the machine when the hopper is empty.
Relieve the load on the coupling points (lower / upper link) before removing
the machine.
After unhitching, place the universal drive shaft, hydraulic hoses, and electric
cables in the retainers provided for the purpose.
Figure 8.32: Storage of the cables and hydraulic hoses
[1] Bracket for hoses and cables
[2] Universal drive shaft bracket
n DANGER
Crushing hazard between the tractor and the machine
Persons standing between the tractor and the machine while they
are being parked or unhitched are in lethal danger.
Ensure that nobody is present in the hazard zone between
the tractor and the machine.
To Next Page
Loading...
