General commissioning (all machine types)
77
8
Correcting the spreading distance
The specifications in the provided assembly manual are standard values. If there
are deviations in the fertiliser quality, it may be necessary to correct the setting.
For reducing the spreading distance, move towards the spreading disc
(smaller numbers).
For increasing the spreading distance, move away from the spreading disc.
(greater numbers).
8.10 Adjustment of the series and/or special equipment TELIMAT
TELIMAT is a remote-controlled limited and full border spreading system for
working widths of 12 - 42 m (or limited border spreading only, depending on the
fertiliser type).
TELIMAT is mounted on the right side of the machine. You can control the TELI-
MAT set-up from the tractor via a single-acting control valve.
8.10.1 Setting TELIMAT
You prepare TELIMAT for spreading in accordance with the fertiliser type, the
working width and the desired type of boundary spreading (limited or full bor-
der spreading).
NOTICE
The attachment of TELIMAT T25 to the machine is described in detail in a sep-
arate assembly instruction manual. An assembly manual is included in the scope
of delivery of the TELIMAT unit.
NOTICE
The setting values for TELIMAT can be obtained from the fertiliser chart.
To Next Page
Loading...
