Rauch AXIS-M 20.2 EMC - Setting the Working Width; Selecting the Correct Spreading Disc

Spreading operation B
132
AXIS
AXIS 30.1, AXIS 40.1
B.5 Setting the working width
B.5.1 Selecting the correct spreading disc
Various spreading discs are available for implementation of the working width de-
pending on the fertiliser type.
There are two different, permanently installed spreader vanes on every spreading
disc. The spreader vanes are marked according to their model.
Spreading disc type Working width
S2 12-18m
S4 18-28 m
S6 24-36 m
S8 30-42 m
n WARNING
Risk of injury from rotating spreading discs!
The distribution unit (spreading disc, vanes) may catch and pull-in
body parts or objects. Contact with the distribution unit may injure,
crush or cut off body parts.
 Maximum admissible mounting heights at front (V) and rear
(H) are to be complied with at all times.
 Ensure that nobody is present in the hazard zone of the
machine.
 Never remove deflectors mounted on the hopper.
Spreading disc type Spreading disc left Spreading disc right
S2 S2-L-170
S2-L-240
S2-R-170
S2-R-240
S2 VxR plus (coated) S2-L-170 VxR
S2-L-240 VxR
S2-R-170 VxR
S2-R-240 VxR
S4 S4-L-200
S4-L-270
S4-R-200
S4-R-270
S4 VxR plus (coated) S4-L-200 VxR
S4-L-270 VxR
S4-R-200 VxR
S4-R-270 VxR
S6 VxR plus (coated) S6-L-255 VxR
S6-L-360 VxR
S6-R-255 VxR
S6-R-360 VxR
S8 VxR plus (coated) S8-L-390 VxR
S8-L-380 VxR
S8-R-390 VxR
S8-R-380 VxR
K
D
R
C
Q
W
EMC