Rauch AXIS-M 20.2 EMC - A Commissioning

Commissioning
159
A
AXIS 50.2
A Commissioning
A.1 Connecting the slide controls
A.1.1 Connecting the hydraulic slide actuators: Version D
Requirements for the tractor
 two double-acting control valves
Function
The opening slides are actuated separately by two hydraulic cylinders. The hy-
draulic cylinders are connected to the slide actuation on the tractor via hydraulic
hoses.
Attachment
1. Depressurise the hydraulic system.
2. Remove the hoses from the brackets attached to the frame of the machine.
3. Insert the hoses into the corresponding couplings on the tractor.
A.1.2 Connecting the electronic slide actuator: Version W
Version Hydraulic cylinder Operation
D Double-acting hydraulic cylinder The oil pressure closes.
The oil pressure opens.
NOTICE
The machines of the version W are equipped with an electronic slide actuator.
The electronic slide actuator is described in a separate operator’s manual for the
operating unit. This operator’s manual is an integral part of the operating unit.
AXIS 50.2
K
D
C
Q
W
R