Rauch AXIS-M 20.2 EMC - Settings for Unlisted Fertiliser Types; Requirements and Conditions

General commissioning (all machine types)
81
8
AXISAXIS
8.11 Settings for unlisted fertiliser types
The settings for fertiliser types not listed in the fertiliser chart can be calculated
using the practice test kit (optional equipment).
To check the spreader settings quickly, we recommend the layout for one pass.
To determine the spreader settings accurately, we recommend the layout for
three passes.
8.11.1 Requirements and conditions
 Conduct the test on a dry day, with no wind, so the weather will not influence
the result.
 We recommend an area that is horizontal in both directions for the test area.
The tracks must not have any significant cavities or heights since this may
distort the spreading pattern.
 Carry out the test either on freshly mown grass or on a field with low vegeta-
tion (max. 10 cm).
NOTICE
For calculating the settings for unlisted fertiliser types, please also see the sup-
plementary manual for the practice test kit.
NOTICE
The requirements and conditions apply to both one pass and three passes.
Observe these conditions to ensure that the results are as accurate as possible.