Rauch AXIS-M 20.2 EMC - 4 Technical Data; Manufacturer; Description of the Machine

Technical data
25
4
AXISAXIS
4 Technical data
4.1 Manufacturer
RAUCH Landmaschinenfabrik GmbH
Landstraße 14
D-76547 Sinzheim
Phone: +49 (0) 7221 / 985-0
Fax: +49 (0) 7221 / 985-200
Service Centre, Technical Customer Service
RAUCH Landmaschinenfabrik GmbH
Postfach 1162
D-76545 Sinzheim
Phone: +49 (0) 7221 / 985-250
Fax: +49 (0) 7221 / 985-203
4.2 Description of the machine
Use the machines of the AXIS series in accordance with the chapter “Intended
use“ on page 1.
The machine consists of the following assemblies.
 2-chamber hopper with agitators and discharges
 Frame and coupling points
 Drive elements (drive shaft and transmission)
 Metering elements (agitator, metering slide, scale for the spreading volume)
 Elements for adjusting the working width
 Protective equipment; see “Protective devices on the machine“ on page 15.