Rauch AXIS-M 20.2 EMC - C.2.4 Using the Steps Securely

Maintenance and repair
151
C
AXIS
AXIS 20.1
AXIS 30.2, AXIS 40.2
C.2.4 Using the steps securely
Use hand grips when climbing onto the machine.
 Only use latched and folded-out steps.
 Without hopper cover on machine, use the side wall of the hopper as hand
grip in order to securely climb onto the machine.
 If the machine is equipped with a hopper cover, use the hand grip on the hop-
per cover in order to securely climb onto the machine.
Figure 16: Climbing onto the machine without hopper cover
Figure 17: Climbing onto the machine with hopper cover
K
D
R
C
Q
W
EMC