General maintenance and repair (all types) 9
196
9.2 Maintenance plan
Component parts Maintenance tasks
Maintenance plan
Description
Wear parts and screw
connections
Inspect regularly Page 200
.
Plastic parts Inspect regularly Page 200
.
Cleaning To be carried out after
each deployment
Page 199
Protective grid in hopper Open the protective grid
before starting any mainte-
nance work
Page 197
Agitator Check for wear Page 202
Removing and mounting
spreading discs
Check for wear
Check tightness of cap
nut (38 Nm)
Chapter B.5.2
1
1. See the register of your machine (AXIS 20.2, AXIS 30.2 or AXIS 50.2)
Replace spreader vane Check for wear Page 204
Spreading disc hub Check position Page 201
Metering slide adjust-
ment
Adjustment AXIS 20.2: Chap. C.2
1
AXIS 30.2: Chap. C.4
1
AXIS 50.2 W: Chap. C.5
1
Drop point setting Adjustment AXIS 20.2: Chap. C.3
1
AXIS 30.2: Chap. C.5
1
AXIS 50.2 W: Chap. C.6
1
Gear oil Quantity and types;
Change oil
Page 206
Lubrication plan Page 199
To Next Page
Loading...
