EasyManua.ls Logo

Rauch AXIS-M 20.2 EMC - Operation

Rauch AXIS-M 20.2 EMC
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety 3
10
AXISAXIS
3.5.5 Operation
If the machine malfunctions, stop the machine immediately and secure it.
Have the fault repaired immediately by qualified technicians.
Never climb onto the machine while the spreader unit is running.
Only operate the machine with the protective grid in the hopper closed. Dur-
ing operation, the protective grid must neither be opened nor removed.
Rotating machine components can cause serious injury. For this reason, en-
sure that you avoid any contact between body parts or clothes and rotating
components.
Do not deposit any external parts (such as screws, nuts) in the spreader hopper.
Ejected spreader material may cause serious injury (e.g. to the eyes). For this
reason, ensure that nobody is present in the spreading area of the machine.
If the wind speed is too high, stop the spreading operation because the spec-
ified spreading range cannot be guaranteed under such conditions.
Never climb onto the machine or the tractor when it is situated beneath high-
voltage electrical power lines.

Table of Contents

Related product manuals