Rauch AXIS-M 20.2 EMC - TELIMAT T 25 (AXIS 20.2;30.2;40.2 Only); Two-Way Unit (Only for AXIS 20.2;30.2;40.2); Tele-Space Universal Drive Shaft; Universal Drive Shaft with Ratchet Clutch (Only AXIS 20.2)

Technical data 4
38
AXISAXIS
4.4.5 TELIMAT T 25 (AXIS 20.2/30.2/40.2 only)
The TELIMAT is used for remote-controlled border and boundary spreading from
the track (right side).
A single-acting valve is required for the operation of the TELIMAT T25.
4.4.6 Two-way unit (only for AXIS 20.2/30.2/40.2)
The two-way unit can be used to connect the machine to tractors with only one
single-acting control valve.
4.4.7 Tele-Space universal drive shaft
The Tele-Space universal drive shaft is extendible and provides additional space
(approx. 300mm) for easier coupling of the machine to the tractor.
When delivering the Tele-Space drive shaft, separate assembly instructions are
supplied.
4.4.8 Universal drive shaft with ratchet clutch (only AXIS 20.2)
The ratchet safety clutch limits the torque in case of overloads.
4.4.9 Auxiliary lighting
The machine can be fitted with auxiliary lighting.
Lighting Application
BLF 25/50
 Lighting for front
 with warning sign
 for wide extensions
BLF
 Lighting for front
 without warning sign
 for wide extensions
NOTICE
The lighting mounted ex works depends on the country of use of the attachment.
 Contact your dealer/importer if you need rear lighting.
NOTICE
Attachments are subject to the lighting regulations specified in the traffic regula-
tions.
 Observe the traffic regulations of your country.