General commissioning (all machine types) 8
52
7. Tighten the hexagonal screw
and nut using a size 17
wrench (max. 35Nm).
Figure 8.3: Tighten the universal drive shaft
8. Push the drive shaft guard
with hose clamp over the
drive shaft and loosely attach
it to the extension housing of
the transmission (do not
tighten).
9. Turn the universal drive shaft
guard to the locking position.
Figure 8.4: Put the universal drive shaft
guard back on
10. Tighten the locking screw.
11. Tighten the hose clamp.
Figure 8.5: Secure the universal drive shaft
guard
To Next Page
Loading...
