General commissioning (all machine types)
61
8
Figure 8.10: Mounting position and height during normal fertilisation
The following applies:
3.
If the maximum admissible mounting height of the machine is exceeded in the
normal fertilisation mode, or if the mounting heights A and B cannot be
reached: the machine is to be mounted according to the
late fertilising
values.
AXIS 20.2/
AXIS 30.2/AXIS 40.2
AXIS 50.2
A + crop height ≤ V Max. 1040 mm Max. 990
B + crop height ≤ H Max. 1040 mm Max. 990
To Next Page
Loading...
