u
Rotate the plastic ring until it reaches its
locking position.
u
Press the lubricating nipple into a closed
position on the universal drive shaft guard.
Fig. 15: Securing the universal drive shaft cover
Notes for removal:
• Dismount the universal drive shaft in reverse order of mounting.
• Never use the suspension chain for suspending the universal drive shaft.
u
Always place universal drive shafts which
have been removed on the bracket
provided.
Fig. 16: Universal drive shaft bracket
7. Commissioning
MDS 8.2/14.2/18.2/20.2 5902916
45
To Next Page
Loading...
