Rauch MDS 8.2 - Page 47

n
Mounting the transmission with radial pin clutch
u
Remove the spigot protection and grease the transmission spigot.
Fig. 18: Pushing the universal drive shaft onto the transmission spigot
u
Place the universal drive shaft on the transmission spigot.
Fig. 19: Fastening the universal drive shaft
u
Tighten the hex cap screw and nut using a size 17 wrench (max. 35 Nm).
7. Commissioning
MDS 8.2/14.2/18.2/20.2 5902916
47