Rauch MDS 8.2 - Page 48

n
Mounting the drive shaft guard
u
Push the drive shaft guard with hose clamp over the drive shaft and loosely attach it to the
extension housing of the transmission (do not tighten).
u
Turn the universal drive shaft guard to the locking position.
Fig. 20: Attaching the universal drive shaft guard
u
Tighten the locking screw.
u
Tighten the hose clamp.
Fig. 21: Securing the universal drive shaft cover
7. Commissioning
48
5902916 MDS 8.2/14.2/18.2/20.2